Driving a Santa Cruz without a proper hitch limits what the trucklet can do. Towing and carrying accessories both need a solid mounting point, and skipping one costs comfort, safety and money.
Most owners buy the Cruz for weekend gear and light towing, then find the bumper alone cannot handle it. A weak or wrong fit rattles, sags and puts stress on the frame. Our guide covers the best hitch for the hyundai santa cruz.
Owner reviews we checked often mention fitment confusion and loose hardware. We compared towing capacity, installation difficulty, finish and reported fit for each option to find the best hitch for the hyundai santa cruz.
Top 3 Picks for Best Hitch for the Hyundai Santa Cruz
Tuxtreme Class 3 Trailer
- ▸SAE J684 safety tested
- ▸5000 lbs gross trailer weight
- ▸Multi-layer powder coating
Class 3 Trailer Hitch
- ▸Dual-coat rust protection
- ▸Includes hitch cover
- ▸27.81 pounds installed weight
maXpeedingrods Trailer Hitch
- ▸Rubber hitch cover included
- ▸Thick welds, carbon steel
- ▸5000 lbs towing capacity
How to Choose the Best Hitch for the Hyundai Santa Cruz
Fit is the first thing we check for the Santa Cruz, because its unibody frame and low rear bumper leave less room than a body-on-frame truck. We compared product data, owner feedback and expert research to narrow the options. Receiver class, wiring needs and how the hitch mounts on this specific model decide whether a setup works cleanly or causes trouble.
Confirmed Fit for the Santa Cruz
We looked for hitches listed specifically for the Santa Cruz rather than generic pickups. Owners report that some universal hitches sit too close to the bumper or exhaust, and drilling or trimming is sometimes needed. Check the listed model years and trim notes before buying. A hitch confirmed for your truck saves installation headaches and keeps the receiver at a usable height.
Class 3 Rating and What You Tow
Most options in this guide are Class 3, which suits the Santa Cruz for light trailers, bike racks and cargo carriers. We compared the stated tongue weight and towing limits against what owners commonly haul. Stay within the lowest rating in the chain, including the hitch, ball mount and the truck itself. Overloading a unibody vehicle stresses the mounting points.
Wiring and Install Effort
Trailer lights need a wiring harness, and not every hitch kit includes one. We checked which hitches ship with hardware and which need a separate harness. Owners often mention bolt-on installation with basic tools, though some report tight access near the bumper. Factor in the wiring cost and time before you decide.
All 12 Picks at a Glance
In-Depth Reviews
Editor's Choice
1. Tuxtreme Class 3 Trailer Hitch Receiver Fits 2022-2026 Hyundai Santa Cruz
Our Top Pick — the strongest all-round choice for most buyers.
SAE J684 certified3-year warranty
Certified and Coated
PROS
- ✓Vehicle-specific fit for Santa Cruz
- ✓SAE J684 safety certification
- ✓5000 lbs GTW and 750 lbs TW
- ✓Double corrosion protection
- ✓3-year manufacturer warranty
CONS
- ✗Heaviest of the three at 40 pounds
- ✗Higher price than basic options
Tuxtreme Class 3 Trailer Hitch Receiver Fits…
- Fits 2022-2026 Santa Cruz
- 2 inch receiver, bolt-on install
- 5000 lbs GTW, 750 lbs TW
- Carbon steel, SAE J684 certified
- Limited 3-year manufacturer warranty
Tuxtreme Class 3 Trailer is the pick we lean toward for Santa Cruz owners who tow regularly. The assembly-style design mounts to factory frame points and the rear bumper structure, so the fit is specific to the truck rather than a universal compromise. It carries a 5000 lbs gross trailer weight and 750 lbs tongue weight rating, enough for small campers and cargo trailers.
Carbon steel construction is tested to SAE J684 standards, and the finish gets a multi-layer gloss black powder coat plus a rust-resistant undercoat. That matters on a Santa Cruz used near winter roads or the coast, where road salt and spray attack the receiver tube. Owners commonly report the coating holds up well against dust and chipping.
Installation is bolt-on with no drilling required on most compatible vehicles, and all mounting hardware is included. Tuxtreme backs it with a limited 3-year warranty, the longest of the three we compared. For a Santa Cruz that sees regular towing duty, this is the most complete package in our research.
Best for Frequent Towing
Santa Cruz owners who tow small campers or cargo trailers regularly will get the most from this hitch. The certified steel build and long warranty suit trucks that work hard.
The extra corrosion coating also helps if the truck lives where roads are salted in winter.
Not Ideal for Occasional Use
Buyers who only mount a bike rack a few weekends a year may find this more hitch than they need. The 40 pound weight also makes solo installation harder.
Shoppers on a tight budget should compare the lighter options below before deciding.
Best Value
2. Class 3 Trailer Hitch, 2" Receiver Fits 2022-2026 Hyundai Santa Cruz
Dual-coat finishHitch cover included
Lightweight Dual-Coat
PROS
- ✓Lightest of the three at 27.81 lbs
- ✓Dual-coat rust and UV protection
- ✓Hitch cover included
- ✓No-drill bolt-on installation
- ✓Fits 2022-2026 Santa Cruz
CONS
- ✗Only a 12-month warranty
- ✗Not for vertical hanging bike racks
Class 3 Trailer Hitch, 2" Receiver Fits…
- Fits 2022-2026 Santa Cruz
- 5000 lbs GTW, 750 lbs TW
- 2 inch receiver with cover
- Drill-free bolt-on install
- 12-month warranty
Dual-coat rust-resistant finish and included hitch cover at a lighter 27.81 pound weight
Class 3 Trailer Hitch from Autekcomma is the lighter option we noted for Santa Cruz owners who install at home. At 27.81 pounds it is easier to handle alone than the other two, and it still carries the same 5000 lbs gross trailer weight and 750 lbs tongue weight ratings. A hitch cover is included to keep dirt and moisture out of the receiver tube.
The dual-coat finish pairs a rust-resistant liquid A-coat with black powder coat, cured together for resistance to rust, chipping and UV rays. That is a sensible spec for a Santa Cruz parked outside year round. One limitation from the data: it is not compatible with vertical hanging bike racks, so check your rack style before buying.
Installation is bolt-on with no drilling, and a detailed manual plus all accessories come in the box. Autekcomma covers it with a 12-month warranty, shorter than Tuxtreme’s. For Santa Cruz owners who want a standard 2 inch receiver for a ball mount or cargo carrier at a lighter weight, this is a solid fit.
Best for Easy DIY Install
Santa Cruz owners who plan to bolt the hitch on themselves will appreciate the lower weight. It suits truck owners who mainly carry a cargo carrier or tow a light trailer.
The included cover is a nice touch for trucks that sit outside between trips.
Not Ideal for Vertical Racks
If you run a vertical hanging bike rack, this receiver is not compatible according to the product data. Skipping it avoids a return.
Buyers who want the longest warranty should look at the Tuxtreme option instead.
Best for Cover Included Value
3. maXpeedingrods Trailer Hitch, Tow Hitch for Hyundai Santa Cruz 2022-2026
Rubber hitch coverCarbon steel
Cover Included Value
PROS
- ✓Rubber hitch cover included
- ✓Heavy duty carbon steel build
- ✓5000 lbs GTW and 750 lbs TW
- ✓Black powder coated finish
- ✓Fits 2022-2026 Santa Cruz
CONS
- ✗Instructions are electronic only
- ✗No warranty period listed in the data
maXpeedingrods Trailer Hitch, Tow Hitch for Hyundai…
- Fits 2022-2026 Santa Cruz
- 2 inch receiver, Class 3
- 5000 lbs GTW, 750 lbs TW
- Heavy duty carbon steel
- Black powder coated finish
Ships with a rubber hitch cover that blocks dirt, rain, snow and small animals from the tube
maXpeedingrods Trailer Hitch rounds out our picks for Santa Cruz owners who want a basic Class 3 receiver with a cover in the box. The 2 inch receiver accepts standard ball mounts, cargo carriers and bike racks, and it is rated for 5000 lbs gross trailer weight and 750 lbs tongue weight. Those numbers cover light trailers and most hitch-mounted gear.
Heavy duty carbon steel with thick welds gives it the strength expected for towing, and the black powder coat adds corrosion resistance. A rubber hitch cover is included, which blocks dirt, dust, rain, snow and small animals from entering the tube. That is a practical detail for a Santa Cruz that sits outside between trips.
One thing to plan for: the instructions are an electronic manual you download, or you can contact the seller for help. Owners commonly report the hardware and fit work as described once the guide is in hand. It is a straightforward choice for Santa Cruz owners who mainly need a receiver for occasional towing and accessories.
Best for Occasional Towing
Santa Cruz owners who tow a small trailer now and then, or just need a receiver for a bike rack, will find this covers the basics. The included rubber cover protects the tube between uses.
It suits buyers who are comfortable downloading an electronic manual.
Not Ideal for Paper Manuals
Buyers who prefer printed instructions in the box should note the manual is electronic only. That can slow a first-time install.
Shoppers who want a stated warranty period should compare the other two options.
Best Concealed Look
4. Class 3 Trailer Hitch 2 Inch Receiver Fits Hyundai Santa Cruz 2022-2026
Concealed bodyLiquid A-coat
Exposed Receiver Tube
PROS
- ✓Open receiver tube drains dirt and debris
- ✓Covers 2022 to 2026 Santa Cruz models
- ✓Concealed body keeps a factory look
- ✓Co-cured A-coat and powder coat finish
- ✓Rated for 5,000 lbs towing
CONS
- ✗1-year warranty is shorter than rivals
- ✗Not rated for vertical-hung bike racks
Class 3 Trailer Hitch 2 Inch Receiver…
- Class 3 receiver hitch
- Rated 5,000 lbs gross trailer weight
- 750 lbs tongue weight
- Open 2-inch receiver tube
- Liquid A-coat and black powder coat
Concealed body gives a factory look with liquid A-coat protection co-cured inside and out
Santa Cruz owners who tow regularly and want a receiver they can clean easily get the Class 3 Trailer Carbon. The open 2-inch receiver tube is a practical detail for a truck that sees dirt, road salt and gravel, because debris can be flushed out instead of trapped.
Fitment covers Santa Cruz models from 2022 to 2026, and the bolt-on design uses the factory mounting points. The concealed main body keeps the receiver tucked behind the bumper for a factory look, while precision welds are there for strength and a secure fit. Owners commonly report that the finished install looks like it came from the factory rather than an add-on.
Corrosion protection comes from a liquid A-coat co-cured inside and out, then a high-gloss black powder coat on top. That two-layer approach matters on a Santa Cruz that tows near water or lives through winter road salt. Awayet backs the hitch with a 1-year warranty, and the package includes the hitch itself for a straightforward bolt-on job.
Best for Easy-Clean Towing
Santa Cruz owners who tow utility trailers or run cargo carriers and want a receiver that stays clean. The open tube makes flushing out grit simple after off-road or winter use.
Buyers who want a factory-style concealed body and a bolt-on install that covers 2022 to 2026 trucks.
Not Ideal for Long-Term Coverage
Owners who want the longest possible warranty should look at the CURT option instead. The 1-year coverage here is modest for a part that stays exposed.
Drivers planning to use vertical-hung bike racks will need a different receiver design.
Best Lifetime Warranty
5. CURT 13486 Class 3 Trailer Hitch, 2-Inch Receiver
SAE J684 Tested
PROS
- ✓Tested to SAE J684 standards
- ✓Limited lifetime warranty
- ✓Dual-coat rust and UV protection
- ✓Concealed body for factory look
- ✓Custom factory fit on select years
CONS
- ✗Not compatible with vertical-hung bike racks
- ✗Finish warranty limited to 1 year
CURT 13486 Class 3 Trailer Hitch, 2-Inch…
- Class 3 hitch, 2-inch receiver
- 5,000 lbs GTW and 750 lbs TW
- Concealed main body for OE look
- SAE J684 tested at Detroit facility
- Dual-coat rust and UV finish
CURT Class 3 Trailer is the choice for Santa Cruz owners who put a premium on proven safety testing. Every design in this line is tested on-vehicle at CURT’s Detroit engineering facility against SAE J684 standards, which is the kind of documentation that matters when you are pulling a loaded trailer behind a compact truck. It carries the same 5,000 lbs gross trailer weight and 750 lbs tongue weight ratings, limited by the lowest-rated towing component on the truck.
The 2-inch receiver accepts standard ball mounts, cargo racks and most bike racks, though CURT notes it is not compatible with vertical-hanging racks. A concealed main body gives the Santa Cruz a factory look, and the hitch offers a custom factory fit on select model years. Owners frequently mention the clean appearance and the straightforward bolt-on install.
Finishing is a dual-coat system, rust-resistant liquid A-coat under a durable black powder coat, co-cured for resistance to rust, chipping and UV rays. That matters for a truck used near the coast or through salted winters. CURT backs it with a limited lifetime warranty and a 1-year finish warranty, and the unit ships at roughly 38 pounds.
Best for Proven Safety Testing
Santa Cruz owners who want documented safety testing behind their tow setup. The SAE J684 testing and lifetime warranty give long-term peace of mind.
Buyers who tow regularly and want a factory-style concealed body that holds up to salt and sun.
Not Ideal for Vertical Bike Racks
Drivers who haul bikes on vertical-hanging racks should skip this one. CURT states the receiver is not compatible with that style.
Anyone wanting the lowest upfront cost may prefer the WeiSen option instead.
Best Easy Bolt-On
6. WeiSen Class 3 Trailer Hitch 2" Receiver Fit Hyundai Santa
Electrophoretic primerHardware included
Complete Install Kit
PROS
- ✓Hardware and instructions included
- ✓Uses original mounting holes
- ✓Electrophoretic primer plus powder coat
- ✓Rated for 5,000 lbs towing
- ✓Precision-welded heavy-duty steel
CONS
- ✗Fitment stops at 2025 models
- ✗1-year warranty is shorter than rivals
WeiSen Class 3 Trailer Hitch 2" Receiver…
- Fits Santa Cruz 2022 to 2025
- 2-inch receiver, Class 3
- 5,000 lbs GTW and 750 lbs TW
- Heavy-duty steel construction
- Electrophoretic primer plus powder coat
Uses original mounting holes with electrophoretic primer plus high-gloss black powder coat
We researched the WeiSen Class 3 Trailer hitch, compared its specs against owner feedback, and picked it as a solid value for 2022-2025 models. The package includes the hitch, installation hardware and instructions, and it uses the original holes on the truck for an ideal fit. Fitment covers all Santa Cruz trims in that year range, so confirm your model year before ordering.
The 2-inch receiver works with ball mounts, cargo racks and most bike racks, though not vertical-hung bikes. It is rated for 5,000 lbs gross trailer weight and 750 lbs tongue weight, limited by the lowest-rated towing component. Heavy-duty steel with precision welds is built for strength and long service, and owners commonly report the hardware kit makes the job easier.
Weather protection comes from an electrophoretic primer under a high-gloss black powder coat. That combination is aimed at harsh conditions and easy cleaning, which helps a Santa Cruz that tows through mud, rain or winter salt. WeiSen covers the hitch with a 1-year manufacturer warranty.
Best for Complete DIY Install
Santa Cruz owners who want a full kit in one box. Hardware and instructions are included, so there is no separate trip for bolts.
Drivers of 2022 to 2025 trucks who want a heavy-duty steel receiver at a straightforward value.
Not Ideal for 2026 Trucks
Owners of 2026 Santa Cruz models should skip this one, since fitment stops at 2025. The Class 3 Trailer Carbon covers the newer year.
Buyers who want a lifetime warranty will find better coverage from CURT.
Best Streamlined Fit
7. TULALUX Class 3 Trailer Hitch Compatible with 2022-2026 Hyundai Santa Cruz
Concealed cross tubeBolt-on design
Concealed Cross Tube Fit
PROS
- ✓Vehicle-specific fit for 2022 to 2026 Santa Cruz
- ✓Clean concealed cross tube look
- ✓Solid 5,000 lbs and 750 lbs ratings
- ✓Bolt-on with no frame drilling
- ✓One year warranty included
CONS
- ✗Exhaust and spare tire must be lowered to install
- ✗Rating still limited by the truck’s own capacity
TULALUX Class 3 Trailer Hitch Compatible with…
- Rated 5,000 lbs GTW, 750 lbs tongue
- Standard 2 x 2 inch receiver
- Black powder-coated steel build
- Bolt-on, no frame drilling
- Concealed cross tube behind bumper
Concealed cross tube tucks behind the bumper, though install needs exhaust and spare lowered
TULALUX Class 3 Trailer is built for the 2022 to 2026 Santa Cruz and uses the truck’s existing mounting points, so the fit follows the factory layout rather than a universal bracket. The steel body carries a black powder-coated finish, and the concealed cross tube tucks the main structure behind the bumper for a cleaner look.
Towing figures come in at 5,000 lbs gross trailer weight and 750 lbs tongue weight, which suits small utility trailers, boats and campers within the truck’s own limits. The 2 inch receiver takes common ball mounts, cargo carriers and bike racks. We note that the rating is always capped by the lowest-rated part in the setup, so the Santa Cruz towing limits still apply.
Installation is bolt-on with no welding or drilling through the frame, though the exhaust and spare tire need to be lowered temporarily to reach the mounting points. That extra step is worth planning for on a driveway job. A one year warranty backs the unit, and the 39.9 pound weight is manageable for a two-person fit.
Best for Stock-Look Towing
Santa Cruz owners who want a receiver that stays tucked behind the bumper and keeps the truck looking factory. The concealed cross tube and bolt-on fit suit light trailer and rack duty.
Drivers who tow utility trailers, boats or campers within the truck’s limits and want a simple steel hitch with a standard 2 inch opening.
Not Ideal for Quick Bolt-On Jobs
Buyers who want a hitch that goes on without touching other parts. Lowering the exhaust and spare tire adds time and effort to the install.
Owners planning heavy loads beyond the Santa Cruz rating, since the hitch cannot raise the truck’s own towing ceiling.
Best Corrosion Protection
8. HD Ridez 2 Inch Trailer Hitch Receiver for Hyundai Santa Cruz
Triple-layer coatingE-coating
Triple-Layer Rust Protection
PROS
- ✓Triple-layer rust protection
- ✓SAE J684 tested to manufacturer claims
- ✓Weight distribution supported
- ✓No drilling during install
- ✓Three year limited warranty
CONS
- ✗Fitment listed only to 2025 models
- ✗Test claims come from the brand, not our own checks
HD Ridez 2 Inch Trailer Hitch Receiver…
- 5,000 lbs GTW, 750 lbs tongue
- Weight distribution supported
- Pre-treated steel with E-coating
- Dual-stage black powder coat
- Bolt-on, no drilling required
Triple-layer protection with E-coating inside and out plus dual-stage powder coat for rust resistance
HD Ridez Trailer Hitch is aimed at 2022 to 2025 Santa Cruz models and shaped to sit against the factory rear bumper for an OE-style fit. Carbon steel forms the base, and the finish is the talking point: pre-treated steel, E-coating inside and out, then a dual-stage black powder coat. For a truck that sees winter road salt or coastal air, that layered approach is what we look at first.
Capacity is listed at 5,000 lbs gross trailer weight and 750 lbs tongue weight, with weight distribution supported. The brand states it exceeds V5 standards and was tested to SAE J684. We treat those as manufacturer claims, and the Santa Cruz’s own ratings still set the real ceiling for any load.
Mounting is bolt-on with all hardware included and no drilling required, which keeps the job simpler than hitches that ask you to drop other parts. A limited three year manufacturer warranty is longer than most in this group. Owners commonly report the coating holds up well, which matters on a truck used for weekend trailer duty.
Best for Winter and Salt
Santa Cruz owners in snowy or coastal areas who worry about rust on a hitch that lives outdoors. The E-coating and dual-stage powder coat are built for that exposure.
Drivers who want weight distribution support and a longer warranty on a bolt-on receiver for light to moderate trailer duty.
Not Ideal for 2026 Trucks
Owners of 2026 Santa Cruz models, since the listed fitment stops at 2025 and the bracket may not match.
Buyers who want independently verified safety figures rather than brand-stated test results.
Best for 2022-2024
9. HECASA Class 3 Trailer Hitch Compatible with 2022-2024 Hyundai Santa
2-inch receiverBlack finish
Simple Budget Receiver
PROS
- ✓Standard 2 inch receiver opening
- ✓Class 3 category for light trailer duty
- ✓Fits 2022 to 2024 Santa Cruz
- ✓Simple black finish
- ✓Clear part number for reference
CONS
- ✗No tow or tongue weight ratings listed
- ✗Does not cover 2025 or 2026 models
HECASA Class 3 Trailer Hitch Compatible with…
- Class 3 trailer hitch
- Fits 2022 to 2024 Santa Cruz
- 2 inch receiver
- Black coating
- Part number NN2162
Covers only the 2022-2024 Santa Cruz range with a 2-inch receiver and black finish
HECASA Class 3 Trailer is listed for the 2022 to 2024 Santa Cruz and carries a 2 inch receiver, the common size for ball mounts, cargo carriers and bike racks. The black finish and Class 3 label place it in the same working category as the others here. Its fitment window is the narrowest of the three, so 2025 and 2026 owners should check before ordering.
Published data for this hitch is thin. The listing gives the brand, part number NN2162 and model, but no tow rating, tongue weight or installation notes. We could not confirm capacity figures from the product data, so anyone planning to pull a trailer should verify the numbers with the seller or the door jamb sticker on the truck.
What we can say is that the receiver size and model coverage line up with the Santa Cruz’s common uses: light utility trailers, hitch racks and cargo boxes. Without stated ratings, we would keep loads modest and treat the truck’s own limits as the guide. Buyers who want documented capacity should look at the other two options first.
Best for Light Accessory Use
Santa Cruz owners with a 2022 to 2024 truck who mainly need a 2 inch receiver for a bike rack or cargo carrier. The basic Class 3 format covers those jobs.
Buyers on a tight budget who can confirm capacity details with the seller before towing anything.
Not Ideal for Towing Without Specs
Anyone planning to pull a trailer who needs documented weight ratings up front. The listing does not provide them.
Owners of 2025 or 2026 Santa Cruz models, since the stated fitment stops at 2024.
Best Lightweight Option
10. TLAPS 7422437574511 Compatible with 2022-2026 Santa Cruz Class 3 III
18 pound weightPowder-coated steel
Heavy Steel Build
PROS
- ✓Covers all Santa Cruz models from 2022 to 2026
- ✓Solid 5000 lbs and 750 lbs ratings
- ✓Powder coat resists rust and road salt
- ✓Bolt-on fit with no welding required
- ✓Compact 18 pound build
CONS
- ✗Only 30 days to return if fitment is off
- ✗No anti-rattle cover included in the kit
TLAPS 7422437574511 Compatible with 2022-2026 Santa Cruz…
- Compatible with all Santa Cruz models
- Class 3 hitch with 2 inch receiver
- 5000 lbs weight carrying capacity
- 750 lbs tongue weight rating
- Black powder-coated heavy-duty steel
Lightest listed at 18 pounds with a 30-day free return warranty window
TLAPS Compatible covers the full 2022 to 2026 Santa Cruz range, which matters because the truck’s unibody rear frame leaves little room for a loose-fitting hitch. The 2 inch receiver opens up the usual gear for this truck: bike racks, cargo carriers and small utility trailers. A 5000 lbs weight carrying figure and 750 lbs tongue weight put it in line with what the Santa Cruz can sensibly handle.
Heavy-duty steel with a black powder coat is the spec we look for on a truck that sees gravel roads and winter salt. The coating is there to fight corrosion, and owners of coated hitches in this class commonly report the finish holding up better than bare steel. At 18 pounds and 21 inches long, the unit stays compact enough to tuck under the rear bumper without dragging on driveways.
Bolt-on installation is the headline for most buyers, since the Santa Cruz mounting points are already there and no welding is needed. The 30 day free return warranty gives a short window to confirm fitment before committing. We would still check the receiver height against your ball mount before ordering.
Best for Full Model Coverage
Buyers with a 2022 to 2026 Santa Cruz who want one hitch that covers every trim. The broad application list takes the guesswork out of ordering.
Owners who tow light trailers, boats or campers and want a bolt-on steel hitch with a corrosion-resistant finish.
Not Ideal for Long-Term Warranty Seekers
Shoppers who want a longer warranty should look elsewhere, since coverage here runs only 30 days.
Drivers who expect a receiver cover or anti-rattle hardware in the box will need to buy those separately.
Best Anti-Drop Cover
11. Class 3 Trailer Hitch 2" Receiver Fits 2022-2026 Hyundai Santa Cruz 13486
Anti-drop coverAll-welded steel
Third-Party Tested
PROS
- ✓Independently tested by a third-party lab
- ✓One year warranty
- ✓Includes anti-drop receiver cover
- ✓All-welded steel construction
- ✓Matches factory mounting points
CONS
- ✗Heavier and bulkier to store before install
- ✗Fitment must be verified against the application list
Class 3 Trailer Hitch 2" Receiver Fits…
- Fits Santa Cruz 2022 to 2026
- Replacement for part 13486
- 5000 lbs gross trailer weight
- 750 lbs tongue weight rating
- Two-part black powder coat
All-welded steel hitch ships with an anti-drop receiver cover for dust, rust and loss protection
Built around the 13486 replacement fit for the 2022 to 2026 Santa Cruz, the Class 3 Trailer Standard has a custom fit design aimed at factory mounting points. That matters on a unibody truck where a sloppy bracket can rattle or foul the bumper. All necessary hardware comes in the kit, so the install stays bolt-on.
What separates this one in our research is the testing claim. The hitch is independently tested by a third-party laboratory and checked for fatigue and stress, which is the kind of documentation we like to see for a 5000 lbs gross trailer weight and 750 lbs tongue weight rating. Solid all-welded steel backs that up, and the two-part black powder coat is specified to resist rust in all weather.
A small detail we appreciate is the anti-drop hitch receiver cover included in the kit. It keeps dust and rust out of the tube and stays attached so it does not go missing between trips. The one year warranty is the longest of the group, which suits buyers planning to keep the truck for years.
Best for Documented Safety Testing
Buyers who want proof behind the ratings, since this hitch is independently lab tested and stress checked. That gives more confidence when towing near the limit.
Santa Cruz owners who plan to keep the truck long term and value the one year warranty and included receiver cover.
Not Ideal for Casual Light-Duty Use
Drivers who only occasionally carry a bike rack may find the extra testing and warranty go unused.
Anyone wanting a quick throwaway part should skip it, because the larger box and heavier steel take more storage space.
Best Basic Kit
12. Kojem Trailer Hitch Compatible with 2022-2024 Santa Cruz 2" Trailer Hitch
Powder-coated blackInstallation hardware
Simple Bolt-On Kit
PROS
- ✓Clear fitment for 2022 to 2024 trucks
- ✓Hardware and instructions included
- ✓Standard 2 inch receiver
- ✓5000 lbs and 750 lbs ratings
- ✓Powder coat protects against rust
CONS
- ✗Does not list coverage past 2024
- ✗No warranty period stated in the data
Kojem Trailer Hitch Compatible with 2022-2024 Santa…
- Compatible with 2022 to 2024 Santa Cruz
- Class 3 hitch with 2 inch receiver
- 5000 lbs towing capacity
- 750 lbs tongue weight
- Screw-based bolt-on installation
Powder-coated black receiver with mounting hardware and instructions for 2022-2024 models only
Kojem Trailer Hitch Compatible is aimed at the 2022 to 2024 Santa Cruz, so buyers with the earliest years of the truck get a direct option. The 2 inch by 2 inch receiver accepts the standard ball mounts, cargo carriers and bike racks most owners already own. Ratings sit at 5000 lbs gross trailer weight and 750 lbs tongue weight, matching the rest of this group.
Powder-coated black finish is the main protection here, and it serves double duty by keeping the hitch looking tidy under the bumper while guarding against rust and wear. The package includes the hitch, the necessary installation accessories and an instruction sheet, with screws used for mounting. That makes it a practical pick for a driveway install on a truck with factory mounting points.
Owners commonly pair a receiver like this with carriers for bikes and recreational gear, or with a trailer for camping and moving. The powder coat is the only corrosion layer listed, so we would keep an eye on the coating after salty winters. Checking your model year against the 2022 to 2024 range is the key step before ordering.
Best for Early Model Year Trucks
Owners of 2022 to 2024 Santa Cruz models who want a hitch confirmed for their year. The included hardware and instructions keep the install straightforward.
Buyers who already own standard 2 inch accessories and want a simple receiver to mount them.
Not Ideal for Newer Trucks
Anyone with a 2025 or 2026 Santa Cruz should skip this one, since the fitment list stops at 2024.
Shoppers who want a stated warranty period will not find one in the product data here.
How We Picked
Our picks come from the product details supplied for each hitch and from what buyers say in customer reviews. We did not rely on advertising or marketing claims. Instead, we researched the listed specifications and compared them with owner feedback.
Fitment for the Santa Cruz was the first thing we compared, along with hitch class, weight ratings and the materials used. We also looked at how each hitch mounts and what the product data says about installation.
Owner reviews shaped the list as well. Praise for solid construction and straightforward bolting came up often, while complaints about fitment issues or missing hardware appeared more than once. We weighed both sides when deciding what to include.
Ordering the list so different needs and budgets are covered was our final step. Some buyers want a simple, affordable hitch, while others need higher capacity or a particular finish. The result is a spread of options rather than a single recommendation.
Frequently Asked Questions
What Type of Hitch for the Hyundai Santa Cruz Do Most Owners Choose?
Class III receiver hitches dominate owner discussions because the Santa Cruz is built as a compact truck that people actually use for bikes, small trailers and cargo racks. We compared the listed capacities and found most hitches for the Santa Cruz are rated around 3,500 to 5,000 pounds towing with a matching tongue weight, which lines up with the truck’s own factory ratings. Custom fit models bolt to the existing frame holes, so no drilling is usually needed.
Materials matter too. Powder coated steel is the common choice for durability in road salt and gravel, while some owners pick lighter designs for easier handling during installation. We looked at owner feedback and found rust complaints cluster around cheaper coatings, so check the finish before you buy. A bolt-on, vehicle specific hitch is the safest default for this truck.
Will a Hitch for the Hyundai Santa Cruz Fit My Trim and Model Year?
Fit varies by year and trim, so always match the hitch to your exact Santa Cruz. We researched listings and found most hitches are grouped by model year ranges, and the SE and SEL often share the same mounting points while higher trims can differ because of bumper sensors or rear fascia changes. A hitch designed for one year range may not clear the bumper on another.
Check the product data for the stated year range and any notes about sensor interference or exhaust clearance. Owners commonly report that hitches listed for their exact year bolt up without modification, while mismatched years cause bumper contact or blocked sensor brackets. Measuring your receiver height and checking the install notes before ordering saves a return.
Is a Hitch for the Hyundai Santa Cruz Safe for Towing and Bike Racks?
Safety starts with staying inside the rated capacity printed on the hitch and in the owner’s manual. We compared the published specs and found most hitches for the Santa Cruz carry a Class III rating, but the truck’s own towing limit and tongue weight are the real ceiling. Exceeding tongue weight is the most common risk with bike racks and loaded cargo trays.
Use a torque wrench on the mounting bolts and recheck them after the first few hundred miles, which owners frequently mention in feedback. Hitch pins and anti rattle devices should be rated for the load. For bike racks, a stabilizing strap reduces sway. We recommend confirming the hitch rating matches your heaviest planned trailer or rack before purchase.
How Much Should I Expect to Pay for a Hitch for the Hyundai Santa Cruz?
Budget depends on the design and finish rather than the truck itself. We compared listings and found basic bolt-on receiver hitches sit at the lower end, while models with better coatings, integrated wiring brackets or heavier construction cost more. Custom fit hitches for the Santa Cruz generally cost more than universal ones because of the vehicle specific mounting.
Factor in extras that shoppers often forget, like a wiring harness, ball mount, hitch pin and anti rattle clamp. Owners report that buying a complete kit upfront is cheaper than sourcing parts separately. We suggest setting a total budget that includes installation if you are not doing it yourself, and comparing the full package rather than the hitch alone.
How Do I Care for a Hitch for the Hyundai Santa Cruz in Winter?
Road salt is the main enemy of any hitch, and the Santa Cruz sees plenty of it in northern climates. We researched owner reports and found rust usually starts at welds, bolt holes and the receiver opening where coating wears thin. Rinsing the hitch with fresh water after salted drives is the simplest habit that owners credit with keeping it clean.
Touch up chips with matching paint before they spread, and keep the receiver tube greased lightly to stop moisture sitting inside. Owners also mention removing the ball mount between trips so the pin hole does not seize. We compared coated versus bare steel and suggest a powder coated hitch plus a periodic inspection as the practical routine.
Why Does My Hitch for the Hyundai Santa Cruz Rattle or Hit the Bumper?
Rattling usually comes from a loose hitch pin or play between the ball mount and the receiver, not from a defective hitch. We looked at owner feedback and found most complaints trace to undersized pins, missing anti rattle clamps or bolts that were never re-torqued after installation. A snug fitting pin and a clamp quiet most setups.
Bumper contact is a fit problem. Hitches designed for a different model year or trim can sit too close to the fascia, and rear sensors may trigger false alerts. We compared install notes and found that checking the stated year range and sensor clearance before buying prevents this. If contact persists, a hitch with a longer receiver depth is the usual fix.
Final Thoughts
After comparing fitment data, build materials and owner feedback, we picked the Tuxtreme Class 3 Trailer as the best hitch for the hyundai santa cruz. It balances a straightforward bolt on install with the capacity most owners need for bikes, gear and light trailers. The Class 3 Trailer Hitch is a solid alternative for buyers who want a simple, no fuss setup.
For heavier duty towing, the CURT Class 3 Trailer suits owners who tow more often and want a well known brand behind the steel. Casual users who mostly carry racks can save with the maXpeedingrods Trailer Hitch.
Our final advice: confirm your trim and model year against the fitment notes before ordering, since bumper and sensor layouts vary across Santa Cruz builds.

















